 |
|
- Carrier Film for Form Plastic Cutting.
- Protection Film for Screen Printing Process.
- Protection Film for Matted Film (Diffusion Film).
- Protection Film for Metal.
- Protection Film for Optical Film Processing.
|
 |
| Type |
Base Film |
Liner |
Adhesion Strength (PET) |
Features |
| 75LS |
75µm PET |
25µm PET |
0.07 N/25mm |
Re-Adherable,
Anti-Static |
| 50LS |
50µm PET |
25µm PET |
0.07 N/25mm |
Re-Adherable,
Anti-Static |
| 25LS |
25µm PET |
25µm PET |
0.07 N/25mm |
Re-Adherable,
Anti-Static |
| 75MS |
75µm PET |
25µm PET |
0.19 N/25mm |
Mid-Low Tack , Anti-Staticc |
|
 |
The table shows typical test results and does not guarantee material value. |
|
| |
| Object |
SUS |
PET |
Glass |
Acrylic Board |
LSE/BC Side |
| 75LS |
0.02 N / 25mm |
0.07 N / 25mm |
0.05 N / 25mm |
0.06 N / 25mm |
0.03 N / 25mm |
| 75MS |
0.11 N / 25mm |
0.19 N / 25mm |
0.17 N / 25mm |
0.23 N / 25mm |
0.08 N / 25mm |
|
|
Peel from Prosave side at 300m/min, 180°angle. |
|
Typical sample data only. Not guaranted value. |
|
LSE is one of KIMOTO Diffusion Film on BC side is Back Coat side. |
|
| |
| Storage Condition |
Normal Room Temperature |
High Temperature |
| 75LS |
 |
 |
| 75MS |
 |
 |
| Note |
|
Applying with each object and measuring the adhesive
strength after the every time period. |
|
Storage Condition 23°C/50%. |
|
The table shows typical test results and does not guarantee material value. |
|
|
Applying with each object and measuring the adhesive
strength after the every time period. |
|
Storage Condition 80°C. |
|
The table shows typical test results and does not guarantee material value. |
<Caution>
Adhesion transfer may occure an SUS after high temperature storage. |
|
|
|
| |
|
|
|
